1 2 3 4   5 6 7 8 9   10 11   12     T A - A - N - - - - N

1. Case Style

Select One: Case A - 0.250" L, 0.275 Ø Case B - 0.250" L, 0.188 Ø, 0.250 Ø Flange Case C - 0.300" L, 0.125 Ø Case D - 0.250" L, 0.250 Ø Select from one of the four Case Style options.

2. Calibration

Select One: Type J Type K Type T Type E Type S Type R Type N Type B Other Maximum temperature limits for each ANSI type thermocouple materials are given (see “more info” button), however these will vary depending on sheath materials, application atmospheres, wire gauge size, insulating materials and epoxy composition.

3. Junction

Tip Style: Flat Tip Tip Styles: The application dictates the choice.   e.g. Fast response time = Exposed Tip. (G)- TC measuring junction is one with the sheath so they have the same electrical potential. (U) – TC measuring junction is insulated from the sheath to eliminate outside electrical interference. Type: Grounded Ungrounded

4. Element Type

Select One: Single Duplex Up to three separate thermocouples in a single sheath.  Separate ungrounded junctions can be wired to different instruments.

5. Sheath Material

Select One: 304SS 316SS Copper Brass Nickel Plated Copper Tin Plated Copper The application dictates the choice of sheath materials.  304SS and 316SS are most commonly used but temperatures and corrosive conditions can necessitate the use of other materials.

6. Babbitt Tip

Select One: None Babbitt Tip

7. Leadwire Construction

Material: Teflon® Know the application atmosphere and limitations – temperature, moisture, corrosion and abrasion.  Flexible wire is available in solid or stranded conductors with many sizes (gauge), insulations and calibrations to meet nearly all applications. Configuration: Stranded Conductor Stranded Conductor - SS Overbraid

8. Leadwire Gauge

Select One: 26 Gauge 24 Gauge 20 Gauge 30 Gauge Insulated wire, solid or stranded, in a variety of insulations is carried in the most common sizes from 16 to 24 gauge.

9. Leadwire Length "A"

Enter Inches: There is no limit to the leadwire length however when the distance to the instruments is 150 feet or more a 4-20ma signal conditioner is recommended.

10. Leadwire Terminations

Select One: No Split / No Strip Split Leads Spade Lugs Ring Lugs 1/4 Push-on Other The type of termination selected may be restricted by the wire gauge.

11. Split Length "E"

Enter Inches:

10. Special Options

N None X X-ray Junction A Special Limits of Error Y Certificate of Conformance G Shielded Leadwire 2 High Temp Oxidation Coating L Mating Connector 3 Test at Process Temp O Seperate Ungrounded 4 BX Connector Q Individual Leadwires (3/8" Strip std) Z Special

1 2 3 4   5 6 7 8 9   10 11   12     T A - A - N - - - - N